July 3, 2011

The Toast-Powered Cat Levitation Device

Blog, we all know about the mind-blowing paradox of what would happen if you affixed a piece of buttered toast on the back of a cat and then dropped said cat. Because there are two immutable principles in the Universe:

1. A cat always lands on its feet.

2. Toast always lands buttered-side down.

I am not the first to theorize that were you to strap toast to a cat, the only possible result would be that it would remain suspended in the air. Now, what if you were to also contrive headgear for said cat that would allow it, via brainwaves, to control the direction of the contradictory cat/toast forces?

Well, you would undoubtedly get something like this:


Today I built an experimental scale model of the Toast-Powered Cat Levitation Device, including Toast Pack and Control Headgear. Don't tell me this isn't just awesome. In case you are too stunned to believe your own eyes, look again:


Sure enough, it IS real, Blog! In an artificial sort of way! And theoretical! No doubt you are dying to know how you too can make your own T-PCLD, because that is the natural human response to these photos. Never fear, I am here to provide complete directions.

1. The next time you throw away an old calculator, be sure to do as I did: take it apart and save the clear plastic circuitry sheet. Because you just never know, do you? Ditto the weird green bottle top, scraps of aluminum and brass, odd hardware doohickeys, leather lacing, and copper wire.

2. While it is possible to do this with real toast and a real cat, remember you are making a scale model and resist the temptation. Find a cat Beanie Baby and open a seam to remove the beans. (Q: What color are the beans in a Beanie Baby? A: Pearly white. Or as Davie would reply, "Magic.") Replace the beans with fiberfill stuffing, and resew the open seam. You may also want to replace the lame thread whiskers with nice springy ones made from Tiger Tail type beading wire, as I did. And take off the Ty tag, it will interfere with the brain waves.


3. Make a piece of buttered toast from polymer clay. This requires ivory and brown clay, textured with a toothbrush and needles, then painted toasty with brown eyeshadow. Make a nice melty butter pat of light yellow, and be sure to paint the pat with Future for shininess after baking your clay toast.

4. For the Toast Pack, curve the brass sheet around the cat's body. Determine the spot above the cat's body + equipment. Remove sheet from cat and drill a hole at the spot with your Dremel tool. Affix the circuitry sheet with a little Super Glue at the edges. Wrap with the aluminum strip. String colorless thread, doubled, or fishing line through the hole, and tie to a piece of bent wire inside the device. Secure wire and thread with clear packing tape. Mount toast to top of Toast Pack with Gorilla Glue.


5. For the Headgear, curl the wire with round pliers and bend into scientifically appropriate shape. Leave a long end to stick inside bottle top, threading also through weird hardware, which should fit snugly on the bottle top tip. Bend end of wire under head bracket to hold bracked in place against bottle top. Pack inside of bottle top with foil to secure wire in position. Run leather lacing through holes in head bracket, pulling tight to hold bracket snugly against wire and bottle top.


6. Slip the cat, hind legs first, into the Toast Pack. Put Headgear on the cat's head and tie leather lacing to secure. Tie the other end of the colorless thread or fishing line to a strong magnet. Now you can hang the cat from iron or steel objects, or use a large steel washer and pinch a flat mounting object between magnet and washer. It's portable! Of course!

Then let your cat fly and watch the amazing results. Birds beware! Dog, pooh on you! Firemen, no need for those tree rescues! NASA, eat your heart out! Okay, so that was hyperbole.


Blog, don't you love science? It's so exciting.

3 comments:

  1. OMG, this is the funniest/coolest thing I have seen in AGES! Up, up and away, Beanie Cat!!!

    ReplyDelete
  2. Awesome! And I have lots of odd hardware doohickeys myself! Top marks, Diana!

    ReplyDelete